Radon mitigation in Speedway
What Speedway homes mean for radon mitigation
Speedway was platted as a factory town in the 1910s, and its core blocks still carry the bungalows and American Foursquares that came with it: block and brick foundations, shallow basements with floors added or patched over a century, and cellar stairs that were never meant to be airtight. The town also sits on the west side of Marion County, the side nearest the New Albany Shale subcrop. Expect sealing work to earn its keep here, and expect a communication test before anyone picks a suction point in a floor poured in three eras.
Speedway housing profile
- County
- Marion, IN
- Housing era
- Mostly pre-1950 housing
- State
- IN
Bungalows and Foursquares from the 1910s and 1920s on block and brick foundations, on the west side of Marion County. Sealing work and a suction test come before choosing the pit location.
Speedway's housing character: a 1910s-1920s company town built in the Motor Speedway’s shadow. That shapes how we scope radon mitigation here. All of our 6 specialty lines are available throughout Speedway and the surrounding Indianapolis metro. Click any service for full details, typical pricing, and process.
- Radon Mitigation Systems in SpeedwayActive sub-slab and sub-membrane systems for central Indiana basements, slabs, and crawl spaces, installed by IDOH-licensed mitigators.Typical: $1,100-$2,200
- Radon Testing in SpeedwayShort-term and long-term radon measurement by IDOH-licensed primary testers, for screenings, real estate, and post-mitigation checks.Typical: $140-$280
- Crawl Space Radon MitigationSub-membrane depressurization for the crawl-space houses that dominate older Indianapolis neighborhoods.Typical: $1,800-$3,400
- Real Estate Radon ServicesInspection-window testing and deadline-driven mitigation for Indiana home sales, built around the seller disclosure.Typical: Test $140 · Mitigation $1,100+
- Commercial Radon MitigationMulti-zone measurement and mitigation for schools, daycares, multifamily, and commercial buildings.Typical: Quote-based
- System Repair & ReactivationFan replacement, manometer and alarm fixes, membrane and seal repairs, and retests for existing systems.Typical: $200-$550
What each service involves in Speedway
Radon Mitigation Systems
A Speedway bungalow basement is often only partly dug, with a cellar under the middle of the house and an unexcavated pocket behind a block wall. The suction point goes where the floor is oldest and most intact, after a test drill shows how far the vacuum carries. Lots are narrow and garages sit off the alley, so the stack commonly climbs the rear wall and clears the eave, keeping the discharge away from the house next door.
Radon Testing
Testing a Speedway house usually means the first floor, because most of these bungalow cellars hold a washer and a furnace rather than a bedroom. If a past owner finished part of the basement, that room becomes the test spot instead. Small houses with steep, open cellar stairs mix air between floors quickly, so a closed-house test started in a cold month gives the clearest picture of what the household breathes.
Crawl Space Radon Mitigation
Speedway crawl work mostly turns up under the back of the house: enclosed porches, kitchen additions and bathrooms added in the decades after the town was platted, sitting over shallow block crawls. Those spaces are small and often reachable only through a panel inside a closet or a new access cut in the wall. The membrane there gets tied into a suction point in the main cellar, so one fan handles both foundations.
Real Estate Radon Services
Speedway homes are small, priced within reach, and change hands often with first-time buyers and investors, so many sales run on tight schedules. The radon test fits inside the same inspection window as the other inspections. Buyers should expect that an old cellar with a patched floor may read higher than the listing photos suggest, and should get a written mitigation quote in hand before the response deadline.
Commercial Radon Mitigation
The town's non-residential buildings lean industrial: race shops, machine and fabrication buildings, and parts suppliers in metal and block structures on slabs near the track, plus the newer mixed-use buildings along the redeveloped Main Street. A slab shop with a heated office corner is the typical job here, and the office and lunch room get measured first, because that is where people spend the whole shift.
System Repair & Reactivation
Many Speedway systems sit on houses where the basement floor was poured and patched in pieces, and over the years the joints between old and new concrete open up. When a system that once tested well starts reading higher, the cause is often a separated patch or an uncapped floor drain rather than the fan. The repair is sealing those joints and making sure the old cellar drain holds a water seal or a trap insert.